Subject:
|
Piper L4 Grasshopper
|
Scale:
|
1/48
|
Manufacturer:
|
Smer
|
Price(December2012):
|
US$8,00
|
Construction:
|
Out-of-the box construction.
|
Extras:
|
None
|
Comments
|
This is Smer's Piper L4 Grasshopper in 1/48 scale. The kit is quite nice, unlike several other releases from this manufacturer. Fit is good and detail is ok for the scale, but the some modelers might want to improve the cockpit area. Painting was done with tamiya acrylics. Decals were the major problem because of transparency issues, but they got down ok over the plastic. Nice kit for the price and an easy project of a important subject.
|
Wednesday, November 18, 2015
Military Aircraft vol.74: Piper L4 Grasshopper
Friday, November 13, 2015
Aircraft walkaround vol.56: Douglas A4-B Skyhawk
Subject: Douglas A4-B Skyhawk.
Location: Intrepid Air and Sea Museum, New York, 2014.
Comments:The Douglas A-4 Skyhawk is a single seat carrier-capable attack aircraft developed for the United States Navy and United States Marine Corps. The delta winged, single-engined Skyhawk was designed and produced by Douglas Aircraft Company, and later by McDonnell Douglas. It was originally designated A4D under the U.S. Navy's pre-1962 designation system. The Skyhawk is a lightweight aircraft with a maximum takeoff weight of 24,500 pounds (11,100 kg) and has a top speed of more than 600 miles per hour (970 km/h). The aircraft's five hardpoints support a variety of missiles, bombs and other munitions and were capable of delivering nuclear weapons using a low altitude bombing system and a "loft" delivery technique. The A-4 was originally powered by the Wright J65 turbojetengine; from the A-4E onwards, the Pratt & Whitney J52 was used. Skyhawks played key roles in the Vietnam War, the Yom Kippur War, and the Falklands War. Sixty years after the aircraft's first flight, some of the nearly 3,000 produced remain in service with several air arms around the world, including from the Brazilian Navy's aircraft carrier, São Paulo.
Sunday, November 8, 2015
Helicpters vol.6: Boeing CH47 Chinook
Subject:
|
Boeing CH47 Chinook
|
Scale:
|
1/144
|
Manufacturer:
|
Revell
|
Price(november 2015):
|
US$15,00
|
Construction:
|
Out-of-the box construction.
|
Extras:
|
None
|
Paints:
|
This is Revell's CH47 Chinook in 1/144 scale. Overall it is a nice kit. Fit is very good except for the windows. The panel lines were nicely engraved, witch is quite important considering the not very interesting painting scheme. The base is a simple picture frame and plasticard painted to represent a segment of an airfield. Painting was done with tamiya acrylics and decals are from the kit.
|
Wednesday, October 28, 2015
Aircraft walkaround vol.55: IAI Kfir C1 (F21A)
Subject: IAI Kfir C1 - F21A
Location: Intrepid Air and Sea Museum, New York, USA 2014.
Comments: The Israel Aircraft Industries Kfir (Hebrew: כְּפִיר, "Lion Cub") is an Israeli-built all-weather, multirole combat aircraft based on a modified French Dassault Mirage 5 airframe, with Israeli avionics and an Israeli-built version of the General Electric J79 turbojet engine.The project that would ultimately give birth to the Kfir can be traced back to Israel's need for adapting the Dassault Mirage IIIC to the specific requirements of the Israeli Air Force (IAF). The all-weather, delta-winged Mirage IIICJ was the first Mach 2 aircraft acquired by Israel from then close ally France, and constituted the backbone of the IAF during most of the 1960s, until the arrival of theDouglas A-4 Skyhawk and, most importantly, the McDonnell Douglas F-4 Phantom II, by the end of the decade. While the Mirage IIICJ proved to be extremely effective in the air-superiority role, its relatively short range of action imposed some limitations on its usefulness as a ground-attack aircraft. Thus, in the mid-1960s, at the request of Israel, Dassault Aviation began developing the Mirage 5, a fair-weather, ground-attack version of the Mirage III. Following the suggestions made by the Israelis, advanced avionics located behind the cockpit were removed, allowing the aircraft to increase its fuel-carrying capacity while reducing maintenance costs. By 1968, Dassault had finished production of the 50 Mirage 5Js paid for by Israel, but an arms embargo imposed upon Israel by the French government in 1967 prevented deliveries from taking place. The Israelis replied by producing an unlicensed copy of the Mirage 5, the Nesher, with technical specifications for both the airframe and the engine obtained by Israeli spies. Some sources claim Israel received 50 Mirage 5s in crates from French Air Force (AdA), while the AdA took over the 50 aircraft originally intended for Israel.The Kfir programme originated in the quest to develop a more capable version of the IAI Nesher, which was already in series production. After General De Gaulle embargoed the sale of arms to Israel, the IAF feared that it might not have an upper hand over its adversaries in the future, which were receiving increasingly advanced Soviet aircraft. The bulk of the Israeli Air Force had been locked into the Mirage but was quickly facing problems because Mirage numbers were somewhat depleted after the Six-Day War. Domestic production would avoid the problem of the embargo completely; efforts to reverse engineer and reproduce components of the Mirage were aided by Israeli espionage efforts to obtain technical assistance and blueprints from third party Mirage operators. Two powerplants were initially selected for trials, the General Electric J79 turbojet and the Rolls-Royce Spey turbofan. In the end, the J79 was selected, not least because it was the same engine used on the McDonnell DouglasF-4 Phantom II, which the Israelis began to acquire from the United States in 1969, along with a license to produce the J79 themselves. The J79 was clearly superior to the original French Atar 09, providing a dry thrust of 49 kN (11,000 lbf) and an afterburning thrust of 83.4 kN (18,750 lbf). In order to accommodate the new powerplant on the Mirage III's airframe, and to deliver the added cooling required by the J79, the aircraft's rear fuselage was slightly shortened and widened, its air intakes were enlarged, and a large air inlet was installed at the base of the vertical stabilizer, so as to supply the extra cooling needed for the afterburner. The engine itself was encased in a titanium heatshield.
Subscribe to:
Posts (Atom)




















































