Subject:
|
BRDM-3
|
Scale:
|
1/35
|
Manufacturer:
|
Dragon
|
Price
|
US$30,00 plus shipping
|
Construction:
|
Out-of-the box construction; replaced vinyl tires
|
Extras:
|
none
|
Paints:
|
This is my BRDM-3 Soviet AFV from Shangai Dragon. Overall a nice kit, although now surpassed by the Trumpeter model with full interior. Fit is very good and detail is nice. I don't like the vinyl tires. In my sample, they were already releasing that oil that damages all the plastic parts that came in contact with it. Fortunately, i found a resin replacement set made by a local manufacturer (Eletric Products) that were quite nice. Painting was done with Tamiya acrylics and weathering was obtained with AK products. The process i made is described below. I hope you like it!
|
 |
| First i painted the hole kit in a dark grey shade. |
 |
| Some parts received the same dark grey primer coat. Others were painted with AK rust primer. |
 |
| I then sprayed some red brown color, specially around areas subjected to heavy weathering like corners, edges and engine deck. |
 |
| I sealed everything with Humbrol gloss coat in preparation for weathering. |
 |
| I then sprayed AK models "worn effects" over all the previously painted parts. |
 |
| Next i sprayed a coat of green color. I did not bother to find a perfect match. Everything would look worn up during latter weathering process. |
 |
| To increase the worn effect, i used the basic green color with some white on the central of most panels and hatches. |
 |
| Then , with a brush i applied water over the surface of the kit and gently removed the paint in some areas . I used several different materials to scratch the surface, depending on how much damage to the paint work i would like to do. |
 |
| Here you see some samples of the weathering |
 |
| To stop the process, i used a coat of future. The gloss finish makes impossible any further scratches. Then i applied a dark wash to highlight the details. |
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.